PhD student, Mert Turfanda, presents Zone Refining-Assisted Purification and Bridgman Growth of CsPbBr3 Crystals for γ-ray Spectroscopy

Date

Friday November 27, 2026
11:30 am - 12:30 pm

Location

Chernoff Hall, Room 117
Event Category

Ph.D. Departmental Seminar

Mert Turfanda

Friday, November 27th, 2026

Chernoff Hall, Room 117

 

Zone Refining-Assisted Purification and Bridgman Growth of CsPbBr3 Crystals for γ-ray Spectroscopy

CsPbBr3 has emerged as a pivotal semiconductor material for room-temperature radiation detection across various radioactive sources and a broad energy range. In this study, we expand the investigation of CsPbBr3 production through an organic-free solution synthesis that achieves an 89% yield from 2N-purity precursors. CsPbBr3 crystals were produced by a two-stage growth strategy combining zone refining and Bridgman growth. Zone refining was employed as a preliminary purification step, and a purified segment was used as the charge for Bridgman growth. This approach yielded a high-purity, single-crystal CsPbBr3 bulk measuring Æ22 × 55 mm, with a mass of 92 g. X-ray diffraction confirmed phase purity and high crystallinity. Inductively coupled plasma mass spectrometry (ICP-MS) tracked impurities throughout the process, with a final impurity level of 166 ppm in the middle section of the Bridgman-grown boule. Current-voltage measurements of the detector with an asymmetric AuIn/CsPbBr3/Au configuration revealed a high bulk resistivity of 5.7 × 109 Ω·cm and a dark current of 62 nA at 50 V, while time-dependent photosensitivity measurements delivered an SNR of 85 at the same bias. The detector resolved gamma peaks from calibration sources of 241Am and 57Co, achieving energy resolutions (FWHM) of 8.9% at 59.5 keV and 8.0% at 122 keV.

These findings highlight the effectiveness of our sequential purification process as an adaptable and cost-effective route to convert low-purity reagents into high-purity CsPbBr3 crystals for gamma-ray spectroscopy, while providing a strong basis for further refinement of the purification and growth processes to improve material properties and detector performance.